The aPriori Wire Harness process group does not support the following processes:
|
Category |
Processes Not Supported |
|---|---|
|
|
Over-molding |
|
Testing |
Shorts Dielectric Insulation Resistance (IR) Voltage Standing Wave Ratio Insertion Loss Reflection Coefficient Crimp Height Crimp Force Monitoring |
|
Wire Prep |
Chemical wire stripping Thermal wire stripping |
|
Splices |
Mesh splices Wrapped soldered splices Hook soldered splices Lag splices Wire in-line junction devices Clip splices |
|
Harness Layout |
Lacing |
Note: aPriori does not currently support mechanical components in the Wire Harness assembly, and does not cost installation of the interconnections or of the cable harness into the chassis or product.